137D6723G1 General Electric Power module

Description

137D6723G1 General Electric Power module

Product Dimensions：

Product Description

A GE power module, also known as a power supply unit (PSU), is an electronic device that converts an unregulated AC or DC input voltage into a stable, regulated DC voltage. This voltage is then supplied to the PLC rack’s backplane, powering all the other installed modules. These units are specifically designed for the harsh conditions of industrial environments, offering high efficiency, reliability, and protection features.

GE’s power modules are typically available in various models to accommodate different power requirements and input voltages, ensuring a suitable solution for a wide range of applications.

Product Parameters (General Examples)

The specific parameters for a GE power module depend on the model (e.g., for PACSystems RX3i or RX7i). However, common specifications include:

• Input Voltage Range: The module’s acceptable input power. Common ranges include 120/240VAC and 24VDC.
• Output Voltage: The module provides a stable DC voltage to the backplane, typically 3.3VDC and 5VDC. Some older systems may also require 24VDC for specific modules.
• Current Capacity: This is one of the most critical parameters. It specifies the maximum current the module can supply, measured in amperes (A). For example, a module might be rated for 15A at 5VDC and 2A at 3.3VDC. This capacity determines how many I/O modules can be installed in the rack.
• Efficiency: The ratio of output power to input power, expressed as a percentage. Higher efficiency means less heat is generated and less energy is wasted.
• Diagnostics: Some advanced models include built-in diagnostics for monitoring output status, over-temperature, and over-current conditions.
• Operating Temperature: Designed for industrial environments, typically ranging from 0°C to 60°C (32°F to 140°F).
• Certifications: Adherence to industrial standards like UL, CE, and cULus.

Product Advantages

• High Reliability: GE power modules are built with robust components to ensure a stable and consistent power supply, which is critical for the reliable operation of the entire control system.
• Overload and Short-Circuit Protection: They include built-in protection features that automatically shut down the output in case of a fault, preventing damage to the power module and other system components.
• Efficient Power Conversion: Modern modules are highly efficient, which reduces heat generation and energy consumption, leading to lower operating costs and a longer lifespan.
• Built-in Diagnostics: Many models provide status LEDs or software diagnostics that alert users to issues like over-temperature or overload conditions, simplifying troubleshooting.
• Hot Swappable: In many GE PLC systems, the power module can be replaced without powering down the entire rack, which is a significant advantage for minimizing downtime during maintenance.

Precautions

To ensure safe and reliable operation of a GE power module, it is essential to follow these precautions:

• Correct Wiring: Always connect the power module to the correct input voltage and ensure proper grounding as specified in the product manual. Incorrect wiring can cause serious damage or safety hazards.
• Load Calculation: Before installing modules in the PLC rack, calculate the total current draw of all components (CPU, I/O modules) to ensure it does not exceed the power module’s maximum output current capacity.
• Ventilation: Power modules generate heat. Ensure there is adequate airflow around the module and the entire rack to prevent overheating.
• Environmental Conditions: Operate the module within its specified temperature and humidity ranges. High temperatures can significantly reduce its lifespan.
• Fuse and Breaker Ratings: Ensure the external fuses or circuit breakers protecting the input power line are rated correctly to protect against overcurrent conditions.

Product Applications

GE power modules are used in any application where a GE PLC system is deployed. They are found in:

• Manufacturing and Automation: Powering control systems on production lines, robotic cells, and material handling systems.
• Process Industries: Providing power for PLCs that control chemical processes, oil & gas operations, and food and beverage production.
• Energy and Power: Powering control systems in power generation plants, transmission substations, and renewable energy facilities.
• Water Treatment: Supplying power to PLCs that manage pump stations, filtration systems, and water distribution networks.

Shipping Port: Xiamen, China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Please make an inquiry for more models：