1FK7042-2AF71-1EH0 SIEMENS Simulation output module

Description

1FK7042-2AF71-1EH0 SIEMENS Simulation output module

Product Dimensions：

Product Description

The primary function of a simulation output module is to provide a physical or visual representation of the PLC’s output commands. Instead of sending current or voltage to a motor or valve, the module captures the signal and displays its status through integrated indicators. This is particularly useful during the early stages of project development or for educational purposes, as it prevents potential mechanical damage or safety hazards that could occur if untested code were to drive real machinery.

Product Parameters

The technical parameters of these modules focus on their ability to mimic standard I/O behavior and provide feedback to the user:

• Signal Emulation: Capable of representing both digital (on/off) and analog (variable) output states.

• Feedback Indicators: Equipped with high-visibility LEDs or digital displays to show the status of each output channel.

• Compatibility: Designed to fit into standard backplane slots of specific PLC families, ensuring seamless mechanical and electrical integration.

• Operating Voltage: Typically powered by the internal backplane bus or a standard 24V DC supply, matching the power requirements of the control system.

• Channel Configuration: Usually available in multi-channel formats (e.g., 8 or 16 channels) to match the density of standard output modules.

• Logic Levels: Matches the logic high/low thresholds of the CPU to ensure the simulation accurately reflects the internal program state.

Product Advantages

• Risk Mitigation: Enables full testing of complex sequences and interlocks without the risk of damaging expensive equipment or causing industrial accidents.

• Faster Commissioning: Allows software engineers to debug code in the office or lab before arriving at the job site, significantly reducing on-site troubleshooting time.

• Cost-Effectiveness: Reduces the need for building elaborate test benches with actual switches, lamps, and actuators.

• Compact Troubleshooting: Provides a clear, immediate visual reference of the PLC’s output logic in a small, rack-mounted footprint.

• Educational Value: Serves as an excellent tool for training personnel on PLC programming and system diagnostics in a non-destructive environment.

Precautions for Use

• Simulated vs. Real Load: Users must remember that simulation modules do not present the same electrical load (impedance/inductance) as real actuators, so they cannot be used to test the power-handling capacity of the system.

• Module Swap Requirements: When transitioning from simulation to production, ensure that the hardware configuration in the software is correctly updated to the actual output module type.

• Insertion and Removal: Follow standard procedures for mounting and dismounting modules from the rack to avoid bending pins or damaging the backplane.

• Limited Diagnostic Testing: While these modules test logic, they cannot simulate certain field faults like wire breaks or short circuits in the external wiring that would occur with real devices.

Product Applications

Simulation output modules are primarily utilized in non-production environments:

• Software Development: Validating PLC programs and functional blocks during the “offline” phase of a project.

• Factory Acceptance Testing (FAT): Demonstrating system logic and sequence of operations to clients before the equipment is shipped or installed.

• Educational Institutions: Training students in automation engineering and electrical maintenance.

• Operator Training Systems: Building simulators that allow plant operators to practice responding to different control scenarios and alarms without affecting the actual plant.

Shipping Port: Xiamen, China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Please make an inquiry for more models：