3RH1921-1FE22 SIEMENS Output module

Description

3RH1921-1FE22 SIEMENS Output module

Product Dimensions：

Product Description

Siemens Output Modules act as the execution arm of the PLC. When the controller’s logic determines that an action should occur, the output module switches the appropriate electrical circuit. These modules provide galvanic isolation to protect the sensitive internal processor from the higher voltages and currents typically found in the field. They are available in various technologies—such as relay, transistor, or triac for digital signals, and current or voltage drivers for analog signals—allowing the system to control anything from a small indicator light to a large industrial valve.

Product Parameters

The technical suitability of an output module is determined by several critical parameters:

• Output Type: Defines the switching technology used, such as solid-state (transistor/triac) for high-speed switching or mechanical relays for high-load capacity.

• Switching Capacity: The maximum current and voltage each channel can handle safely without overheating or failing.

• Update Time: The speed at which the module can react to a command from the CPU, which is crucial for high-speed motion control.

• Resolution and Precision: For analog modules, the bit-depth that determines the granularity of the output signal (e.g., how smoothly a valve can be opened).

• Galvanic Isolation: The level of electrical separation between the internal system bus and the external field circuits.

• Short-Circuit Protection: Built-in electronic safeguards that automatically shut down a channel if a fault is detected, preventing damage to the module.

Product Advantages

Using Siemens Output Modules provides several operational and safety benefits:

• Robust Protection: Integrated protection circuits safeguard against overloads, short circuits, and thermal runaway, ensuring high system availability.

• Modular Versatility: The wide range of available channel densities and signal types allows users to tailor the hardware specifically to the machine’s requirements.

• Enhanced Diagnostics: Many modules feature per-channel diagnostic LEDs and software-based error reporting for wire breaks or missing load voltages.

• High-Speed Performance: Specialized electronic outputs allow for extremely high switching frequencies, which are necessary for pulse-width modulation (PWM) and precise positioning.

• Ease of Replacement: Standardized terminal blocks and modular designs allow for quick replacement during maintenance without re-wiring the entire cabinet.

Important Considerations

To ensure safe and reliable operation, the following guidelines should be followed:

• Inductive Load Protection: When switching inductive loads like solenoid valves or motor starters, external suppression (such as flyback diodes or RC circuits) may be required to prevent voltage spikes.

• Current Limits: Total current across all channels must not exceed the module’s rated power capacity or the capacity of the power supply pins.

• Wiring Logic: Ensure the output wiring (Sourcing vs. Sinking) matches the requirements of the connected field device to avoid incorrect operation.

• Thermal Management: High-current modules generate heat; ensure that the mounting position and cabinet ventilation allow for adequate cooling.

• Simultaneity Factor: Consider the “derating” factor, which limits how many channels can be fully loaded at the same time depending on the ambient temperature.

Product Applications

Output modules are used to drive a vast array of industrial components:

• Actuator Control: Operating pneumatic and hydraulic valves, solenoids, and contactors to initiate mechanical movement.

• Motion Synchronization: Providing speed setpoints to variable frequency drives (VFDs) or control signals to servo amplifiers.

• Process Regulation: Controlling heating elements, lighting systems, and proportional valves in chemical or environmental systems.

• Visual and Auditory Signaling: Driving stack lights, alarm sirens, and HMI status indicators to provide feedback to operators.

• Inter-System Communication: Sending binary or analog status signals to third-party equipment or safety monitoring systems.

Shipping Port: Xiamen, China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Please make an inquiry for more models：