3RK1301-0AB13-0AA4 SIEMENS Power module

Description

3RK1301-0AB13-0AA4 SIEMENS Power module

Product Dimensions：

Product Description

Siemens Power Modules act as the primary energy source for a PLC rack or a decentralized I/O station. These modules convert standard incoming line voltage—whether alternating current (AC) or direct current (DC)—into the stabilized 24V DC typically required by industrial electronics. Beyond simple power conversion, these modules often serve as “System Power Supplies” that feed the backplane bus, enabling communication between modules, or as “Load Power Supplies” that provide energy for sensors and actuators in the field. They are engineered to handle the high inrush currents and electrical noise common in industrial environments.

Product Parameters

The technical specifications of these modules are focused on energy efficiency and output stability:

• Input Voltage Range: Wide-range inputs that support various global standards, typically from 120/230V AC or 24V DC.

• Output Voltage: Highly regulated DC output (usually 24V) with minimal ripple and noise to protect sensitive microprocessors.

• Rated Current: The maximum output current capacity, ranging from low-amperage units for small racks to high-capacity units for large-scale I/O systems.

• Efficiency Rating: High energy conversion efficiency (often exceeding 90%) to minimize heat dissipation within the control cabinet.

• Mains Buffering: The ability to maintain output voltage for several milliseconds during a brief power dip or brownout.

• Redundancy Support: Capabilities for parallel connection or integration with redundancy modules to increase system availability.

Product Advantages

Siemens Power Modules offer several advantages that distinguish them from standard commercial power supplies:

• Seamless Physical Integration: Designed to match the form factor and mounting requirements of the PLC family, ensuring a clean and compact cabinet layout.

• Advanced Protection: Integrated electronic short-circuit and overload protection that can distinguish between temporary inrush currents and actual faults.

• Diagnostic Feedback: Many modules feature signaling contacts or LEDs that communicate the status of the output voltage to the PLC or the operator.

• Reliability: Built with industrial-grade capacitors and components that offer a significantly longer service life than standard power units.

Precautions for Use

To ensure safe and continuous operation, the following guidelines should be followed:

• Derating: Account for temperature-based derating; the maximum output current may decrease if the ambient temperature inside the cabinet exceeds specific limits.

• Wiring Gauge: Use appropriately sized conductors for the output terminals to prevent voltage drops over long distances between the power module and the load.

• Mounting Orientation: Follow the recommended mounting orientation (typically vertical) to allow for natural convection cooling through the module’s vents.

• Grounding: Ensure a low-impedance connection between the module’s ground terminal and the protective earth to minimize electromagnetic interference.

Product Applications

Power modules are foundational to any automation architecture and are used across all sectors:

• Centralized Control Cabinets: Providing the primary logic power for high-performance controllers and local I/O racks.

• Distributed I/O Stations: Powering interface modules and sensors in remote locations across a factory floor.

• Critical Infrastructure: Used in systems requiring high uptime, such as water treatment or traffic management, where power stability is vital.

• Cabinet-Free Solutions: Specialized versions with high IP ratings used for powering decentralized components mounted directly on machinery.

Shipping Port: Xiamen, China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Please make an inquiry for more models：