3RW4028-1BB14 SIEMENS Simulation output module

Description

3RW4028-1BB14 SIEMENS Simulation output module

Product Dimensions：

Product Description

A Simulation Output Module is designed to mimic the interface of a standard output module but functions primarily as a testing device. Instead of driving external hardware like motors or valves, it provides a visual or electronic representation of the PLC’s output commands. These modules are typically used during the development and commissioning phases of a project. They allow the programmer to verify that the controller is sending the correct signals at the right time. By substituting a real output module with a simulation version, the user can observe the status of each channel via integrated indicators, ensuring that the software logic is robust before it is applied to expensive or dangerous industrial equipment.

Product Parameters

The technical characteristics of these modules focus on their ability to replicate standard output behavior and provide clear feedback:

• Signal Emulation: Capability to represent both digital (binary) and analog (variable) output signals.

• Visual Indicators: High-visibility LEDs for each channel to indicate “ON” or “OFF” states for digital simulation.

• Compatibility: Designed to fit into the standard backplane or mounting rail of specific PLC families.

• Power Requirements: Operates using the internal backplane bus power, often eliminating the need for external load power during testing.

• Channel Configuration: Available in various densities, matching the channel count of the standard output modules being simulated.

• Interface: Standardized connector points that allow for the attachment of measuring instruments if signal verification is required.

Product Advantages

• Risk-Free Testing: Enables full verification of control programs without the risk of damaging mechanical components or causing industrial accidents.

• Cost Efficiency: Reduces commissioning time and costs by allowing the software to be debugged before the physical machine is fully wired or powered.

• Simplified Troubleshooting: Helps isolate software bugs from hardware wiring issues by providing a controlled environment for signal analysis.

• Portability: Ideal for training sets and laboratory environments where physical actuators are not practical to install.

• No External Loads Needed: Eliminates the requirement for temporary wiring of lamps or relays just to see if a program is working.

Important Considerations and Precautions

• Temporary Use: These modules are intended for testing and simulation only; they must be replaced with standard output modules before the system goes into live production.

• Backplane Compatibility: Ensure the simulation module is compatible with the specific generation of the PLC rack or interface module being used.

• Safety Logic: Even during simulation, safety protocols should be followed to ensure that the transition from a simulated environment to a live environment is handled systematically.

• Limited Driving Capacity: Unlike standard modules, simulation modules are not built to drive actual electrical loads; connecting them to high-current devices can damage the unit.

• Address Mapping: Ensure that the I/O addresses in the software are correctly mapped to the simulation module slots to get accurate feedback.

Product Applications

• Software Validation: Testing complex PLC programs and interlocking logic in an office or lab setting before on-site installation.

• Educational Training: Teaching students and junior engineers how to program and monitor PLC outputs without requiring a full-scale machine.

• Factory Acceptance Testing (FAT): Demonstrating the functionality of a control system to clients or stakeholders using a compact, simulated setup.

• System Prototyping: Developing new automation sequences for machines that are still in the design or manufacturing phase.

• Remote Debugging: Allowing engineers to replicate on-site issues in a controlled environment by simulating the output responses reported by the field.

Shipping Port: Xiamen, China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Please make an inquiry for more models：