6AV2 124-OMC01-0AX0 SIEMENS Simulation output module

A Simulation Output Module, typically a Digital or Analog output module variant, is designed to provide simulated signals back to the $\text{CPU}$ for testing purposes. It typically includes:

• Physical Simulation Controls: Features built-in switches, buttons, or potentiometers that allow users to manually or systematically set the status of outputs that the $\text{PLC}$ would normally send to the field.
• Overriding Capability: The primary function is to locally override the control signals originating from the $\text{PLC}$ program, effectively simulating the $\text{PLC}$‘s control reaction without powering real actuators.
• Feedback Mechanism: In some contexts, it can be used in conjunction with a simulation input module to create a quick, closed-loop test environment on the rack itself.
• Diagnostic Indicators: Includes $\text{LED}$ indicators to display the current state of the simulated output, whether set by the module’s physical controls or by the $\text{PLC}$‘s logic.

Product Parameters

Parameters focus on the simulation interface rather than industrial load capacity:

Product Advantages

• Virtual Commissioning & Testing: Allows for the comprehensive functional testing of the $\text{PLC}$ program logic, sequencing, and interlocking outside of the production environment, reducing commissioning time on-site.
• Risk Reduction: Eliminates the risk of damaging physical equipment (motors, valves, etc.) during the initial phases of program testing by preventing control signals from reaching the field devices.
• Easy Fault Replication: Enables engineers to quickly and repeatably simulate complex or rare failure conditions to test the program’s error handling and recovery routines.
• Training and Debugging: Provides a safe, hands-on environment for operator training and for detailed debugging of the control program logic without interrupting production.

Precautions

• Mode Selection: Ensure the module is clearly designated for simulation use only and is properly swapped out or switched off before connecting real-world outputs.
• Voltage Rating: Verify that the module’s rated voltage and current parameters are observed, even when simulating, to protect the module itself.
• Documentation: All test plans and simulation scenarios should be documented to ensure thorough coverage of the control system logic.
• Physical Isolation: Where possible, utilize simulation in a physically disconnected environment or ensure a reliable mechanical/electrical lockout is in place to prevent accidental application of simulated signals to live plant equipment.

Product Applications

Simulation Output Modules are crucial in the development lifecycle:

• Factory Acceptance Tests ($\text{FAT}$): Performing initial functional testing of the $\text{PLC}$ program and $\text{HMI}$ screens at the system integrator’s or developer’s facility.
• Software Development: Providing quick feedback to programmers on the behavior of control algorithms and sequential logic during development.
• Virtual Commissioning: Used as part of a hardware-in-the-loop ($\text{HIL}$) setup where the physical outputs are routed back through a simulation $\text{IO}$ module.
• Operator Training: Used in training rigs to simulate normal and fault conditions for operators to practice machine control and response procedures.