6ES7195-1JA00-0XA0 SIEMENS Interface module

Description

6ES7195-1JA00-0XA0 SIEMENS Interface module

Product Dimensions：

Product Description

The Interface Module acts as a gateway or coupler between the high-speed backplane bus of the local I/O rack (or remote station) and the plant-wide industrial communication network (e.g., PROFINET, PROFIBUS). It translates communication protocols, manages the synchronization of data exchange, and handles the addressing and configuration of all I/O modules physically connected to it. In distributed systems, the IM is the single point of connection for the entire remote I/O station.

Product Parameters

Key specifications for SIEMENS Interface Modules focus heavily on communication and system capacity:

• Network Protocol: Supported industrial Ethernet protocols (e.g., PROFINET IO, PROFIBUS DP, Industrial Ethernet/TCP-IP).

• Network Speed: Data transfer rates (e.g., $100 , text{Mbit/s}$ or $1 , text{Gbit/s}$).

• Supported Network Topology: Linear, ring (with media redundancy, e.g., MRP), or star.

• Max I/O Capacity: The maximum number of connected I/O modules or the total amount of data (in bytes) it can exchange with the CCM.

• System Integration: Features to support integrated diagnostics and centralized configuration using the engineering software (e.g., TIA Portal).

• Diagnostic Capabilities: Network diagnostics (e.g., connection status, error counter) and integrated diagnostics from attached I/O modules.

• Power: Power supply requirements for the module itself, and often the ability to supply power to the connected backplane bus.

• Data Refresh Rate: The speed at which I/O data is updated and exchanged with the central controller (crucial for real-time control).

Product Advantages

• Enables Distributed Architecture: Allows I/O signals to be placed close to the process equipment, significantly reducing wiring effort and cost compared to traditional centralized wiring.

• Real-Time Communication: Supports high-speed, deterministic industrial Ethernet protocols, ensuring time-critical data is exchanged reliably and quickly.

• Integrated Diagnostics: Provides a centralized view of network and I/O status, accelerating fault detection and troubleshooting across the entire distributed system.

• Scalability and Flexibility: Supports the expansion of the I/O system without requiring changes to the Central Control Module’s hardware architecture.

• Media Redundancy: Many IMs support ring topologies (e.g., MRP), offering fail-safe communication if a network cable is cut, thereby increasing system availability.

• Ease of Configuration: The module’s network address, communication parameters, and connected I/O are easily configured and centrally managed through the standard Siemens engineering platform.

Important Notes

• Protocol Matching: The IM must be compatible with the communication protocol used by the Central Control Module (e.g., a PROFINET IM must connect to a PROFINET port on the CCM).

• Capacity Limits: Ensure that the total number of connected I/O modules and the volume of exchanged I/O data do not exceed the specified maximum capacity of the Interface Module.

• Addressing: Properly configure the IM’s network address (e.g., IP address or PROFIBUS address) and ensure it is unique within the industrial network.

• Network Integrity: Maintain proper network cabling, shielding, and grounding practices, especially in harsh environments, to guarantee signal integrity and prevent communication errors.

• Firmware: Keep the firmware of the Interface Module updated to benefit from the latest security patches, protocol updates, and performance enhancements.

Product Applications

Interface Modules are utilized in almost any application requiring remote or modular I/O:

• Large Production Lines: Connecting distributed I/O stations along long conveyor belts or across large factory floors in automotive, bottling, or assembly plants.

• Process Skids/OEM Equipment: Acting as the single communication point for pre-packaged, self-contained control units (skids) that need to integrate seamlessly into a larger plant network.

• Utilities and Infrastructure: Used in large facilities like airports, water treatment plants, and power distribution systems where control signals are distributed over wide areas.

• Modular Machine Design: Facilitating the flexible addition or removal of machine modules by connecting the I/O of each module through a standardized network interface.

• Remote Monitoring: Providing a network connection point for monitoring and data acquisition systems located far from the central control room.

Shipping Port: Xiamen, China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Please make an inquiry for more models：