6ES7321-1CH20-0AA0 SIEMENS Analog output module

Description

6ES7321-1CH20-0AA0 SIEMENS Analog output module

Product Dimensions：

Product Description

The Analog Output Module functions by taking a digital control word (a binary number representing the desired output value) from the CCM and passing it through a Digital-to-Analog Converter (DAC). The DAC generates a corresponding physical output signal, usually a standardized $0-20 , text{mA}$, $4-20 , text{mA}$, $0-10 , text{V}$, or $pm 10 , text{V}$ signal. This signal drives field devices, enabling proportional control over a physical variable (e.g., controlling a valve position from 0% to 100%).

Product Parameters

Key specifications for SIEMENS Analog Output Modules include:

• Signal Range: Standardized industrial ranges, most commonly $0-20 , text{mA}$, $4-20 , text{mA}$, $0-10 , text{V}$, or $pm 10 , text{V}$.

• Resolution: The precision of the output signal, typically specified in bits (e.g., 12 bits, 15 bits plus sign, or 16 bits). Higher resolution means finer control steps.

• Accuracy: The deviation between the actual output signal and the theoretical value, specified as a percentage of the full-scale range (e.g., $pm 0.1%$ FSR).

• Conversion Time: The time required for the DAC to convert the digital value and generate the stable analog signal.

• Channel Count: The number of independent output channels per module (e.g., 2, 4, or 8 channels).

• Load Impedance: The maximum permissible impedance (resistance) for a current output or the minimum load impedance for a voltage output, ensuring the signal is properly driven.

• Diagnostics: Monitoring features such as wire break detection (especially for $4-20 , text{mA}$ current loops) and short-circuit/overrange detection.

Product Advantages

• High Precision Control: High resolution (up to 16 bits) and accuracy enable extremely precise and fine regulation of critical process variables.

• Versatility: Offers various output types (voltage/current) and ranges, allowing the module to be used with a wide array of industrial actuators.

• Integrated Safety & Diagnostics: Built-in current monitoring and diagnostic functions, particularly for $4-20 , text{mA}$ signals, provide immediate notification of a wire break or actuator fault.

• Fast Response: Low conversion times allow the module to respond quickly to changes in the control signal, supporting highly dynamic control loops.

• System Integration: Fully supports the centralized engineering environment (e.g., TIA Portal), allowing for easy scaling, linear scaling setup, and consistent diagnostic reporting.

• Galvanic Isolation: Provides electrical separation between channels and the internal electronics, enhancing noise immunity and protecting the system from ground loops and external voltage surges.

Important Notes

• Load Verification: Ensure that the connected actuator’s impedance is within the permissible range specified by the module to avoid signal distortion or damage (e.g., a current output must not be open-circuited).

• Current Loop vs. Voltage: Match the module type and configuration strictly to the actuator’s required signal type (current or voltage). Mismatched connection can damage either the module or the actuator.

• External Power: Many analog output modules require a separate external field power supply ($L+$) in addition to the backplane power; verify and properly connect this supply.

• Scaling and Limits: Properly configure the scaling (e.g., 0-27648 digital units to 0-100% physical value) and safety limits in the control program to prevent the actuator from moving beyond safe operating limits.

• Noise and Shielding: Use shielded twisted-pair cables for wiring analog outputs and ensure the shield is correctly grounded (usually at the cabinet/module end) to minimize electromagnetic interference (EMI).

Product Applications

Analog Output Modules are vital for any application requiring continuous and proportional control:

• Flow and Level Control: Modulating the opening of control valves in chemical, water treatment, and oil & gas industries.

• Motor Speed Control: Setting the reference speed or torque for Variable Speed Drives (VFDs) and servo controllers.

• Temperature Regulation: Controlling heating elements, steam valves, or chiller output proportionally.

• Mixing and Dosing: Precisely regulating the flow rate of ingredients in blending and dosing systems.

• HVAC Systems: Controlling damper positions, fan speeds, and chilled water flow to maintain precise environmental conditions.

Shipping Port: Xiamen, China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Please make an inquiry for more models：