6ES7953-8LJ31- 0AA0 SIEMENS Analog output module

Description

6ES7953-8LJ31- 0AA0 SIEMENS Analog output module

Product Dimensions：

Product Description

Siemens Analog Output Modules act as the “hands” of an automation system where fine-tuning is required. While digital modules only handle two states, these modules can output a range of values, such as varying voltage or current levels. They receive a numerical value from the CPU and, through an internal Digital-to-Analog Converter (DAC), produce a proportional electrical output. These modules are commonly used in closed-loop control systems where a process variable must be maintained at a specific setpoint through constant adjustment.

Product Parameters

The technical performance of an analog output module is defined by its ability to maintain signal integrity and precision:

• Signal Ranges: Standard outputs typically include voltage ranges (e.g., ±10V, 0-10V) and current ranges (e.g., 0-20mA, 4-20mA).

• Resolution: Usually measured in bits (e.g., 12-bit to 16-bit), determining the smallest possible increment the module can output.

• Accuracy: The maximum deviation of the output signal from the theoretical value, often expressed as a percentage of the full-scale range.

• Settling Time: The time required for the output signal to reach and stabilize at a new value after a command is issued.

• Load Impedance: The maximum resistance (for current outputs) or minimum resistance (for voltage outputs) the module can drive effectively.

• Isolation: Galvanic isolation between the internal bus and the analog output channels to prevent ground loops and protect the controller.

Product Advantages

• High Precision Control: Superior resolution allows for extremely smooth control of actuators, which is vital for high-quality manufacturing.

• System Diagnostics: Advanced modules can detect wire breaks, short circuits, or external power supply failures, facilitating rapid troubleshooting.

• Configurable Channels: Each channel can often be individually configured for different signal types (voltage or current) via software.

• Electromagnetic Compatibility (EMC): Built-in filtering and shielding designs minimize the impact of industrial noise on sensitive control signals.

• Seamless Integration: Fully compatible with universal engineering platforms, allowing for easy scaling and parameter assignment without hardware jumpers.

Important Considerations and Precautions

• Shielding and Grounding: To prevent signal interference, analog cables must be shielded, and the shields must be properly grounded at the designated points.

• Signal Loss: For long-distance transmissions, current signals (4-20mA) are generally preferred over voltage signals to minimize the impact of wire resistance and noise.

• External Power: Ensure the module has a stable 24V DC supply, as fluctuations in power can lead to inaccuracies in the analog output.

• Common Mode Voltage: Be mindful of the potential difference between the module ground and the actuator ground to avoid signal distortion.

• Open Circuit Protection: When using current outputs, an open circuit will prevent the device from functioning; use the module’s diagnostic features to monitor circuit integrity.

Product Applications

• Variable Speed Drives: Providing a reference signal to frequency converters to control the speed of AC or DC motors.

• Valve Positioning: Modulating the opening percentage of control valves in piping systems for steam, water, or chemicals.

• Heating Control: Adjusting the power output of solid-state relays or thyristor controllers to maintain precise temperatures.

• Actuator Modulation: Driving proportional solenoids or hydraulic actuators in heavy machinery and construction equipment.

• Signal Retransmission: Sending process values to external chart recorders, displays, or secondary control systems.

Shipping Port: Xiamen, China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Please make an inquiry for more models：