6FX2001-5FP12 SIEMENS Analog output module

Description

6FX2001-5FP12 SIEMENS Analog output module

Product Dimensions：

Product Description

Siemens analog output modules serve as the interface for driving actuators that operate on a continuous scale. These modules receive digital values from the CPU and, through high-quality Digital-to-Analog Converters (DAC), produce corresponding physical signals such as voltage or current. Designed with high electromagnetic compatibility (EMC), these modules ensure that the command signal remains stable and accurate even in environments with heavy industrial noise. They are typically housed in compact, modular enclosures that support easy integration into the broader PLC backplane, often featuring integrated shield connections to maintain signal integrity.

Product Parameters

The technical specifications of these modules focus on precision, speed, and signal range to meet exacting industrial standards. Key parameters include:

• Signal Ranges: Support for standard industrial signals, typically 0 to 10V, ±10V, 0 to 20mA, or 4 to 20mA.

• Resolution: High bit-depth (often 12-bit to 16-bit) to ensure smooth transitions and fine increments in output value.

• Conversion Time: Rapid cycle times that allow the output to follow the controller’s logic in real-time.

• Accuracy and Repeatability: Low operational error limits, often specified as a small percentage of the full-scale value across the entire temperature range.

• Load Impedance: Specific limits for resistive and inductive loads to ensure the module can drive field devices without signal degradation.

• Isolation: Galvanic isolation between the internal bus and the analog output channels to prevent ground loops and protect the PLC.

Product Advantages

Siemens analog output modules offer several distinct benefits for complex automation tasks:

• High Precision Control: The high resolution allows for extremely granular control of field devices, which is essential for maintaining product quality in process industries.

• Comprehensive Diagnostics: Modules can detect and report errors such as short circuits, wire breaks (in current loops), or loss of auxiliary power directly to the engineering software.

• Flexible Configuration: Each channel can often be programmed independently for different signal types (e.g., one channel for voltage and another for current) via software.

• Integration with TIA Portal: Parameter assignment and calibration are handled digitally, eliminating the need for manual potentiometers or hardware jumpers.

• Robust Protection: Built-in electronic protection against short circuits and surges ensures the longevity of both the module and the connected actuators.

Safety and Maintenance Precautions

To ensure the accuracy and safety of analog control loops, the following precautions should be observed:

• Shielding and Routing: Analog signal cables must be shielded and routed away from high-voltage power lines to prevent electromagnetic interference from distorting the signal.

• Common Potential: Ensure that the reference potential (ground) of the module and the connected actuator are correctly managed to avoid ground loop errors.

• Load Compliance: Verify that the total impedance of the connected device and the cable remains within the module’s specified driving capability.

• Calibration Checks: Periodic verification of the output accuracy is recommended, especially in applications where precise dosing or positioning is critical.

• Wait Times: Allow the module to reach operating temperature before performing precision measurements or adjustments, as thermal stability affects accuracy.

Product Applications

These modules are utilized in any application requiring “proportional” or “modulating” control rather than simple switching.

• Process Control: Adjusting the opening percentage of control valves for steam, water, or chemical flow.

• Speed Regulation: Providing frequency setpoints to Variable Frequency Drives (VFDs) to control the speed of pumps, fans, and conveyors.

• Heating and Cooling: Modulating the power output of industrial heaters or the position of dampers in HVAC systems.

• Motion Control: Commanding the position of hydraulic or pneumatic proportional valves in heavy machinery.

• Visualization: Driving analog gauges or meters on local operator panels to represent system variables like pressure or RPM.

Shipping Port: Xiamen, China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Please make an inquiry for more models：