6MF1113-0GC12-0AA0 SIEMENS Simulation output module

Description

6MF1113-0GC12-0AA0 SIEMENS Simulation output module

Product Dimensions：

Product Description

The SIEMENS Simulation Output Module is a specialized tool module designed specifically for the purpose of testing and validating a control program without the need for actual field hardware. Unlike standard output modules that switch real-world loads (like motors or valves), a simulation output module allows engineers and technicians to manually set the state of a digital or analog output signal directly on the module itself. This action forces the corresponding data point in the PLC’s memory, simulating the action of the control program as if a physical output device had reacted. It is an invaluable component for commissioning, troubleshooting, training, and developing automation software in a safe and controlled environment.

A Simulation Output Module is a physical module that fits into the PLC rack or remote I/O station. Instead of having terminals connected to actuators, it features built-in switches or potentiometers corresponding to each output channel.

Operating Principle

When in use, the module overrides the normal output process. Instead of the CPU writing a calculated value to the physical output hardware, the simulation module allows the user to manually:

1. Digital Simulation: Use a toggle switch (or slide switch) for each digital channel to manually set the output state to ON (1) or OFF (0).
2. Analog Simulation: Use a rotary switch or potentiometer for each analog channel to generate a variable digital value that is written back to the output memory, simulating a continuously adjustable output.

This functionality is crucial for testing the integrity of the control program’s logic and sequence dependencies, especially when coordinating with other simulated inputs or processes.

General Product Parameters

Since a simulation module is primarily a testing tool, its parameters focus on user interface and functional alignment with standard I/O.

Product Advantages

1. Safe Commissioning: Allows for comprehensive testing and debugging of control logic without risking damage to expensive field hardware (motors, valves, etc.) or causing unexpected machine movement.
2. Efficient Troubleshooting: Enables quick isolation of problems by separating hardware faults from software logic errors. If the program works correctly when outputs are simulated, the fault lies in the physical wiring or device.
3. Training and Development: Provides an ideal platform for operator and maintenance training in a realistic, risk-free environment, allowing them to practice fault scenarios and start-up procedures.
4. No External Equipment: The required test inputs are built directly into the module, eliminating the need for bulky external test boxes, wiring harnesses, or complex external simulation software.
5. Program Validation: Facilitates the creation and testing of large-scale automation projects off-site (in a factory acceptance test or FAT environment) before shipping the system to the final installation location.

Important Precautions

• Mode Awareness: Extreme caution is required to ensure that the module is only used for simulation purposes. The user must be fully aware that the states being manipulated do not reflect actual physical output status.
• Interlocks: When simulating, always verify that all necessary safety interlocks and conditions are manually simulated or accounted for in the test logic to prevent accidental dangerous actions if any real field devices are connected.
• Documentation: Clearly document the use of the simulation module during testing and ensure it is removed or explicitly disabled before connecting or attempting to operate the actual machinery.
• Power Cycle: After testing, the simulation mode should be officially disabled, often requiring a power cycle or specific software commands to ensure the PLC returns to normal, real-world I/O operation.
• Data Consistency: Recognize that the simulation module only forces the data in the CPU’s memory; it does not check the integrity of the external wiring or the functionality of the final actuator.

Product Applications

Simulation Output Modules are specialized tools used primarily during the development and maintenance phases of automation projects:

• Factory Acceptance Testing (FAT): Performing comprehensive logic testing and program validation at the vendor’s site before the machine is installed at the customer’s facility.
• Software Development and Debugging: Creating and iteratively testing complex sequential and safety logic without the necessity of expensive or unavailable field hardware.
• Operator Training Simulators: Building training rigs where operators can interact with a control panel while the PLC’s logic is fully running, controlled via simulated inputs and outputs.
• Commissioning Support: Quickly verifying specific sections of the control logic during machine startup when external field devices are not yet fully wired or functional.

Shipping Port: Xiamen, China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Please make an inquiry for more models：