6RA8000-0MV62-0AA0-Z SIEMENS Simulation output module

Description

6RA8000-0MV62-0AA0-Z SIEMENS Simulation output module

Product Dimensions：

Product Description

A simulation output module serves as a functional surrogate for standard output modules during the development and testing phases of a project. Instead of sending electrical signals to physical devices like valves or motors, these modules provide a means for the user to manually toggle states or observe the controller’s intended output directly on the hardware. This is particularly useful for verifying the integrity of the user program logic and the internal communication of the system before the machine is fully wired. These modules are designed to integrate seamlessly into the standard controller rack, allowing for a “virtual” commissioning process that significantly reduces the risk of hardware damage during the initial startup of a plant.

Product Parameters

The technical characteristics of these modules focus on their interface capabilities and integration with the controller:

• Switching Elements: Integrated manual switches or potentiometers that allow for the simulation of binary or continuous signal states.

• Status Indicators: High-visibility LEDs for each channel to provide immediate visual confirmation of the controller’s output logic.

• Compatibility: Designed to match the mechanical and electrical specifications of specific controller backplanes.

• Power Supply: Typically draws power directly from the backplane bus, requiring no external field power in many configurations.

• Operating Modes: Support for both manual override modes and program-controlled feedback modes.

• Channel Density: Standard configurations mirroring common output modules, allowing for one-to-one logical mapping.

Product Advantages

• Risk Mitigation: Enables the testing of complex logic sequences without the danger of unintended machine movements or equipment damage.

• Efficient Commissioning: Shortens the time required on-site by allowing for the majority of the software troubleshooting to be completed in an office or lab environment.

• No Field Wiring Required: Saves time and labor during the early stages of development, as the programmer does not need to wire actual actuators to see if the logic is functioning.

• Direct Feedback: Provides immediate physical confirmation of program execution through integrated LEDs, making it easier to debug code than using software-only monitoring.

• Portability: Highly useful for demonstration kits and training stations where physical machinery is not available or practical.

Important Considerations

• Not for Production Use: These modules are intended strictly for testing and simulation; they should be replaced with standard functional modules before the system enters actual production.

• Configuration Matching: The simulation module must be correctly identified in the hardware configuration of the engineering software to ensure the CPU recognizes the I/O addresses.

• Logic Reversal: Users must ensure that the simulation of an “active” signal correctly reflects the intended physical state (normally open vs. normally closed logic).

• Backplane Load: While low-power, the presence of multiple simulation modules should still be accounted for in the total power budget of the rack.

Product Applications

• Software Validation: Checking the accuracy of PLC code, including interlocks, timing sequences, and safety logic, before deploying it to a live machine.

• Operator Training: Building simulation rigs where operators can learn to use the control system and react to simulated fault conditions without affecting real production.

• Factory Acceptance Testing (FAT): Demonstrating the functionality of the control system to the end-user in a controlled environment before shipping the hardware to the site.

• Diagnostic Bench-Testing: Isolating and troubleshooting software bugs that are difficult to replicate while the machine is running.

• Educational Labs: Providing a safe and cost-effective way for students to learn industrial programming and hardware configuration.

Shipping Port: Xiamen, China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Please make an inquiry for more models：