6SL3985-6TP00-0AA0 SIEMENS Analog output module

Description

6SL3985-6TP00-0AA0 SIEMENS Analog output module

Product Dimensions：

Product Description

An analog output module receives digital data from the Central Processing Unit (CPU) and transforms it into a proportional electrical signal, such as voltage or current. This allows the controller to command actuators to assume any position between 0% and 100%. These modules are essential for applications requiring variable speed, precise positioning, or graduated thermal control. To ensure accuracy and system safety, they are equipped with high-quality Digital-to-Analog Converters (DAC) and provide galvanic isolation to protect the internal PLC backplane from external electrical interference or field-side faults.

Product Parameters

The technical performance of analog output modules is defined by their ability to provide stable and accurate signals:

• Signal Ranges: Support for standard industrial ranges, typically 0 to 10V, ±10V, 0 to 20mA, or 4 to 20mA.

• Resolution: High bit-depth (often 12-bit to 16-bit) to ensure smooth transitions and fine-grained control of field devices.

• Number of Channels: Available in various densities, commonly 2, 4, or 8 channels per module.

• Accuracy and Linearity: Low operational error limits and high temperature stability to ensure the output remains precise over time.

• Settling Time: Rapid response rates to ensure that changes in the control logic are reflected in the physical output without significant delay.

• Load Impedance: Specified maximum resistance for current outputs and minimum resistance for voltage outputs to ensure signal integrity.

Product Advantages

• High Precision Control: Enables the fine-tuning of processes, which is critical for maintaining product quality and operational efficiency.

• Comprehensive Diagnostics: Features integrated monitoring for common faults such as short circuits, wire breaks (in current loops), and loss of external power.

• Flexible Parameterization: Each channel can typically be configured independently via software to match the specific signal type required by the actuator.

• Robust Noise Immunity: Built with advanced filtering and shielding capabilities to maintain signal purity in electrically noisy industrial environments.

• Simplified Integration: Perfectly aligned with the TIA Portal, allowing for easy scaling of output values and direct integration into control loops like PID blocks.

Precautions for Use

• Cable Shielding: Always use twisted-pair, shielded cables for analog signals and ensure the shield is grounded at one end to prevent electromagnetic interference from distorting the signal.

• Load Matching: Verify that the impedance of the connected actuator falls within the module’s allowable range to prevent signal clipping or hardware overheating.

• Common Potential: Pay close attention to the common reference point (M-terminal) to avoid ground loops, which can introduce significant measurement errors or damage the module.

• Signal Type Selection: Ensure the software configuration matches the physical wiring (e.g., current vs. voltage) before powering the system to avoid damaging the module or the field device.

• Separation of Cables: Keep analog output lines away from high-voltage AC power cables and variable frequency drive (VFD) output cables to minimize induced noise.

Product Applications

• Variable Speed Control: Providing reference setpoints to frequency converters and motor drives to regulate the speed of pumps, fans, and conveyors.

• Valve Positioning: Controlling the opening degree of proportional valves in hydraulic, pneumatic, or fluid-handling systems.

• Thermal Regulation: Commanding power controllers or heaters to maintain specific temperature profiles in ovens and chemical reactors.

• Process Instrumentation: Transmitting measured process values to external recorders, displays, or third-party control systems.

• Actuator Modulation: Managing the position of dampers and louvers in large-scale HVAC and ventilation systems to optimize airflow.

Shipping Port: Xiamen, China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Please make an inquiry for more models：