FDCI0 223 SIEMENS Analog output module

Description

FDCI0 223 SIEMENS Analog output module

Product Dimensions：

Product Description

Siemens Analog Output Modules provide the interface necessary to control actuators that operate on a spectrum, such as proportional valves, variable speed drives, and heating controllers. These modules transform the internal numerical values of the controller into standardized industrial signals, typically voltage or current. They are engineered to maintain high signal integrity over long distances and are available in various channel densities to suit different system architectures. Most modules feature onboard intelligence to monitor signal health and can be configured to hold specific safety values in the event of a communication failure.

Product Parameters

The technical performance of an analog output module is defined by its ability to provide stable and accurate signals:

• Signal Ranges: Standard support for voltage ranges such as 0 to 10V or +/- 10V, and current loops such as 0 to 20mA or 4 to 20mA.

• Resolution: Typically ranging from 12 to 16 bits, which determines the smoothness and precision of the output signal.

• Settling Time: The speed at which the output reaches its new value after a change in the digital command.

• Load Impedance: Specified maximum resistance for current outputs and minimum resistance for voltage outputs to ensure signal stability.

• Accuracy and Linearity: Low operational error limits and high linearity across the entire output range, even under varying temperature conditions.

• Isolation: Galvanic isolation between the internal bus and the analog circuits to protect the controller from field-side electrical noise.

Product Advantages

These modules offer significant benefits for complex process control and high-precision machinery:

• High Precision: The use of high-quality digital-to-analog converters ensures that the physical process is controlled with extreme accuracy.

• Comprehensive Diagnostics: Real-time monitoring for common faults such as short circuits in voltage outputs or wire breaks in current loops.

• Flexible Configuration: Channels can often be individually configured for different signal types via software, reducing the need for multiple hardware variants.

• Fast Update Cycles: Optimized for high-speed control loops, ensuring that the actuator responds almost instantaneously to the PLC’s logic.

Precautions for Use

To ensure accurate signal delivery and hardware longevity, the following precautions are recommended:

• Shielding and Grounding: Analog signals are sensitive to electromagnetic interference; therefore, shielded cables must be used and properly grounded at the designated points.

• Cable Lengths: Observe maximum cable length specifications to prevent signal degradation or voltage drops, especially when using voltage signals over long distances.

• Load Matching: Ensure that the impedance of the connected actuator falls within the module’s specified range to prevent overheating or signal clipping.

• Potential Differences: Avoid potential differences between the module’s analog ground and the actuator’s ground to prevent circulating currents that could distort the signal.

Product Applications

Siemens Analog Output Modules are utilized in any scenario requiring graduated or proportional control:

• Flow and Pressure Control: Modulating the position of control valves in water treatment or chemical processing plants.

• Motion and Speed Control: Providing speed setpoints to variable frequency drives (VFDs) for conveyor systems or fans.

• Temperature Regulation: Controlling the power output of solid-state relays or heaters to maintain precise thermal conditions.

• Testing and Simulation: Generating variable signals to simulate sensor behavior during the commissioning of other control systems.

Shipping Port: Xiamen, China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Please make an inquiry for more models：