QBE2002-P10 SIEMENS Communication module

Description

QBE2002-P10 SIEMENS Communication module

Product Dimensions：

Product Description

A SIEMENS Communication Module is a hardware component that plugs directly into the backplane or side-connector of a SIMATIC controller (e.g., S7-1200 or S7-1500 family). Its primary function is to serve as an interface or gateway, enabling the controller to communicate over various industrial and commercial networks.

These modules are categorized based on the protocol they support, such as fieldbus communication (PROFIBUS, AS-i), industrial Ethernet variants (PROFINET, Industrial Ethernet), or serial communication (Modbus RTU, RS-485). They handle the physical connection and the protocol processing required to exchange data with external devices like drives, HMI panels, decentralized I/O, sensors, or higher-level systems (e.g., MES/ERP).

Product Parameters

While specific features vary by type (e.g., CM PROFINET vs. CM PROFIBUS), the general functional parameters are:

• Supported Protocols: Defines the communication standard the module can handle (e.g., PROFIBUS DP, Industrial Ethernet, RS-232/485, Modbus).

• Mode of Operation: Specifies whether the module acts as a Master (initiates communication) or a Slave (responds to communication) on the network.

• Baud Rate/Transmission Speed: The maximum data transfer speed supported, often specified in $text{kbit/s}$ or $text{Mbit/s}$.

• Physical Interface: The type of port used for connection (e.g., RJ45 for Ethernet, D-Sub for PROFIBUS, terminal block for serial).

• Maximum Connected Devices: The limit on the number of nodes or devices the module can communicate with.

• Electrical Isolation: Defines the isolation capability between the internal PLC circuitry and the external network interface.

Product Advantages

1. Connectivity Expansion: Easily expands the native communication ports of the main controller, allowing connection to diverse networks and equipment.

2. Protocol Flexibility: Enables a single control system to integrate multiple, disparate communication protocols simultaneously (e.g., connecting a PLC with an integrated PROFINET port to a legacy PROFIBUS network).

3. Performance Offload: The module’s integrated processor handles the complex, time-critical protocol stacks (e.g., managing the PROFIBUS cycle), freeing up the main CPU for core control logic execution.

4. Standardized Integration: Modules are engineered specifically for the SIMATIC environment, ensuring seamless configuration, diagnostics, and data exchange via the standardized engineering software (TIA Portal).

5. Modularity and Scalability: Users can add or remove modules as network requirements change, providing highly scalable and flexible system designs.

Notes (Important Considerations)

• Engineering Software: Requires the Totally Integrated Automation (TIA) Portal for addressing, configuration, and diagnostics.

• Master/Slave Roles: It is critical to select a module that supports the required role (Master or Slave) for the intended network topology.

• Network Limits: Adherence to physical network rules is mandatory, including maximum cable lengths, termination requirements, and the number of nodes per segment.

• Address Configuration: Proper configuration of network addresses (e.g., IP addresses for Ethernet, device addresses for fieldbus) is essential for successful commissioning.

• Firmware Compatibility: Always ensure the module’s firmware version is compatible with the version of the main controller and the engineering software being used.

Product Applications

Communication Modules are vital in nearly every industrial setup for specific networking needs:

• Integration of Fieldbus Networks: Connecting the controller to established fieldbuses like PROFIBUS DP, allowing communication with older decentralized I/O, drives, or sensors.

• Serial Device Communication: Facilitating data exchange with devices using serial protocols like Modbus RTU (e.g., energy meters, specialized instruments, printers).

• Network Segmentation: Creating separate, isolated networks for safety systems, machine-to-machine (M2M) communication, or higher-level IT integration.

• Remote Maintenance and Access: Providing a dedicated, secure network pathway for remote access and maintenance of the control system.

• AS-i Networking: Serving as the gateway to the Actuator Sensor Interface (AS-i) network for simple field devices like buttons and indicator lights.

Shipping Port: Xiamen, China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Please make an inquiry for more models：